ERNiCu-7 Nickle-Copper Alloy Welding Wire
ERNiCu-7 Nickle-Copper Alloy Welding Wire Application
ERNiCu-7 is used for GMAW, GTAW, and SAW welding of Monel 400 and Monel K500. It is also suitable for the welding of Monel 400 to copper-nickel alloys and carbon steels. This Nickle-Copper alloy wire has the similar high strength performance as Monel 400. And it has a good resistance to sea water and reducibility acid.
It is also used for surfacing of steel. Submerged Arc Flux is used with the submerged-arc process. The reaction of titanium with carbon maintains a low level of free carbon and enables the filler metal to be used with Nickel 201. The weld metal has good corrosion resistance, particularly in alkalies.
|ERNiCu-7||AWS A5.14, ERNiCu-7*
ASME II, SFA-5.14, ERNiCu-7
ASME IX, F-No. 42
|BS 2901 (NA33)
DIN 1736 SG-NiCu30MnTi
Werkstoff Nr. 2.4377
ERNiCu-7 Nickle-Copper Alloy Welding Wire Spec
|Straight Rods(TIG)-inch||.047 .062 .093 .125||36 or 39|
|Straight Rods(TIG)-mm||1.2 1.6 2.4 3.2||915 or 1000|
|Spooled Wire (MIG)-inch||.030 .035 .040 .045||Spool|
|Spooled Wire (MIG)-mm||0.8 0.9 1.0 1.14||Spool|
ERNiCu-7 Nickle-Copper Alloy Welding Wire CHEMICAL COMPOSITION(%)
Please note that the above specifications are “general specifications” that pertain to the majority of our production. These specifications should only be used for general, informational purposes. All dimensions and specifications are nominal and are subject to normal manufacturing tolerances. All specifications are subject to change without prior notice. All pictures shown are for illustration purposes only. Actual product may vary.