Products

Twin DC Solar Cable PV1-F

Application: Twin DC Solar Cable suitable for the interconnection of the various elements of photovoltaic systems, suitable for fixed installations outside and indoor, unprotected pipes.For direct or indirect under-ground wiring.ontroller.

Standards: EN 2PFG 1169

Twin DC Solar Cable PV1-F

Twin DC Solar Cable PV1-F Application

Twin DC Solar Cable PV1-F is applied to solar panels for power generation and related components of the wiring, connection, particularly suitable for outdoor. This cable is resistance to sunlight, anti-aging. Using the low smoke halogen-free flame retardant materials make it a higher grade, more safety.

PV1-F TÜV approved solar cable intended for the interconnection within photovoltaic systems such as solar panel arrays. For free movable or fixed installation in photovoltaic installations according to EN 60364-7-712. The cable may be used indoor, outdoor, on earth (please note the laying instruction), in explosion hazard areas in industry and agriculture. The cable is considered to short-circuit and earth-fault safe.

This Pv1-F solar cable is installed within conduit or systems, but not direct burial applications. Our solar cable is ozone-resistant according to BS EN 50396, UV resistant according to HD 605/A1, and is tested for durability according to EN 60216. The cable is designed to last at least 25 years.

Being flame protected with a halogen-free fire retardant system with low smoke properties.these cables are designed for safety in case of fire.

Twin DC PV Wire PV1-F Construction

Conductor material: Bare copper strands Class 5 to IEC 60228
Insulation: Halogen-free electronic beam cross-linked compound
Insulation: Halogen-free electronic beam cross-linked compound,Flame retardant

Twin DC Solar Cables PV1-F Characteristics

MODEL PV1-F
rated voltage AC  0.6/1KV  DC  1.8KV
Temperature range -40°C~+90°C,dry/ humidity
Max.working temperature of conductor  120°C
During short circuit  200°C
Standard EN 2PFG 1169

Twin DC Solar Cable PV1-F Mechanical Performance

Minimum Bending Radius 4×OD (fixed), 5×OD (flexing)
Dynamic Penetration According to 2 PfG 1169/08.2007 Annex F
Notch Propagation According to 2 PfG 1169/08.2007 Annex G
Tensile Strength And Elongation Of Insulation And Jacket According to EN 60811
Anticipated Period Of Service 25 years

Twin Core DC Solar Cable PV1-F Chemical&Fire Performance

Ozone Resistance According to EN 50396 part 8.1.3 Method B
Weathering- UV Resistance According to HD 605/A1
Acid & Alkaline Resistance According to EN 60811-2-1 (Oxal acid and sodium hydroxide)
Flame retardant According to EN 50265-2-1, IEC 60332-1, VDE 0482-332-1-2, DIN EN 60332-1-2
Low smoke emission According to IEC 61034, EN 50268
Halogen-free According to EN 50267-2-1, IEC 60754-1
Low corrosivity of gases According to EN 50267-2-2, IEC 60754-2

Twin DC Solar Cable PV1-F Specification

Type Strand design Conductor diameter Conductor resistance Outer diameter
No.x C.S.A(mm2) No.x ø (mm) mm Ω /km mm
PV-2*1.5 mm² 30x ø 0.25 1.6 13.9 4.5
PV-2*2.5 mm² 48x ø 0.25 2.0 8.06 5.3
PV-2*4.0 mm² 56x ø 0.3 2.6 4.97 6.2
PV-2*6.0 mm² 81x ø 0.3 3.3 3.52 7.2
PV-2*10.0 mm² 200x ø 0.25 4.4 2.12 8.3
PV-2*16 mm² 224x ø 0.3 5.2 1.95 9.5

Options:

200m/roll or 250m/roll (As requested) Outer packing: 8 rolls/carton or 4 rolls/carton
Photographs are not to scale and do not represent detailed images of the respective products.

DISCLAIMER: Please note that the above specifications are “general specifications” that pertain to the majority of our production. Specifications and technical details should only be used for general, informational purposes only. For the actual specification, please check with us when order placed.

Reviews

There are no reviews yet.

Be the first to review “Twin DC Solar Cable PV1-F”

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.