Type SHD-PCG Round Mining Power Cable 2kV
Type SHD-PCG Round Mining Power Cable 2kV Application
These Type SHD-PCG heavy duty cables are designed for use on longwall shearers, where three shielded power conductors, three unshielded control conductors, and a grounding conductor are required.
Rated Voltage of 5Kv, 8kv is available upon request.
Type SHD-PCG Round Mining Power Cable 2kV Standard
ICEA S-75-381/NEMA WC 58
ASTM B 172
ASTM B 33
Type SHD-PCG Round Mining Power Cable 2kV Construction
|Conductors||Stranded annealed tinned copper conductor.|
|Insulation Shield||Non-conducting Tape + Tinned copper/textile braid.|
|Control Group (3 Conductor)||Tinned copper conductor, EPR insulation and thermosetting sheath.
Colour of insulation
|Grounding Conductor||Tinned copper conductor, located in the center of the cable.|
|Sheath||Reinforced extra-heavy-duty Chlorinated Polyethylene(CPE), black.
Other sheath materials can be offered upon request.
|Options:||Other jacket materials such as CSP/PCP/NBR/PVC are available upon request.
Two-layer jacket with reinforcing fibre between the two layers can be offered
as an option.
Type SHD-PCG Round Mining Power Cable 2kV Specification
|No. of cores×
Ampacity-Based on a conductor temperature of 90℃ and an ambient air temperature of 40℃, per ICEA S-75-381.
Please note that the above specifications are “general specifications” that pertain to the majority of our production. These specifications should only be used for general, informational purposes. All dimensions and specifications are nominal and are subject to normal manufacturing tolerances. All specifications are subject to change without prior notice. All pictures shown are for illustration purposes only. Actual product may vary.