P1/P8 RFOU/TFOU Mud Resistant Cable 0.6/1kv
P1/P8 RFOU/TFOU Mud Resistant Cable 0.6/1kv Application
P1/P8 RFOU/TFOU Mud Resistant Cable 0.6/1kv is intended for the installation in offshore applications with special performances on the flame spread and low emission of smoke and fumes, Halogen free, oil and mud resistant.
These P1/P8 RFOU/TFOU Mud Resistant Cables can be installed on drilling ships, drilling platforms ( jack up, semi-submersible), Production Platforms ( TLP, semi-submersible, SPAR, fixed platforms) and FPSO/FSO.
P1/P8 RFOU/TFOU Mud Resistant Cable Standards
| Design | IEC60092-353 |
| Conductor | IEC60228 |
| Insulation | IEC60092-351 |
| sheathed | IEC60092-359 |
| Flame Retardant | IEC 60332-1,IEC60332-3-22 |
| Smoke Density | IEC61034 |
| Mud Resistant | NEK TS 606:2009 |
P1/P8 RFOU/TFOU Mud Resistant Cable Construction
| Classification | Code | Construction details |
| Conductor | Tinned Annealed Stranded Copper Wire | |
| Insulation | R/T | EP Rubber/XLPE |
| Filler | Water blocking fillers, if required | |
| Bedding | Halogen free compound, PETP wrapping tape will be applied over the bedding, if required | |
| Inner Sheath | F | Halogen free thermosetting compound |
| Armor | O | Tinned Copper wire braided |
| Outer Sheath | U | Oil, Mud Resistant, Halogen-free Thermosetting compound SHF Mud |
P1/P8 RFOU/TFOU Mud Resistant Cable Electrical Characteristics
| Nominal Cross Section Area | mm² | 1.5 | 2.5 | 4 | 6 | 10 | 16 | 25 | 35 | 50 | 70 |
| Nominal Conductor Diameter | mm | 1.6 | 2.1 | 2.6 | 3.2 | 4.0 | 5.1 | 6.5 | 7.4 | 8.7 | 10.3 |
| Maximum DC Resistant@20℃ | Ω/km | 12.2 | 7.56 | 4.7 | 3.11 | 1.84 | 1.16 | 0.734 | 0.529 | 0.391 | 0.27 |
| Continuous Current Rating@45℃1 Core | A | 23 | 30 | 40 | 52 | 72 | 96 | 127 | 157 | 196 | 242 |
| Continuous Current Rating@45℃2 Core | A | 20 | 26 | 34 | 44 | 61 | 82 | 108 | 133 | 167 | 206 |
| Continuous Current Rating@45℃ 3&4 Core | A | 16 | 21 | 28 | 36 | 50 | 67 | 89 | 110 | 137 | 169 |
| Short Circuit Current 1s | A | 210 | 360 | 570 | 860 | 1430 | 2290 | 3580 | 5010 | 7150 | 10020 |
| Operating Voltage | KV | 0.6/1 | 0.6/1 | 0.6/1 | 0.6/1 | 0.6/1 | 0.6/1 | 0.6/1 | 0.6/1 | 0.6/1 | 0.6/1 |
| Nominal Cross Section Area | mm² | 95 | 120 | 150 | 185 | 240 | 300 | 400 | 500 | 630 |
| Nominal Conductor Diameter | mm | 12.2 | 13.8 | 15.1 | 17.0 | 19.6 | 21.9 | 24.6 | 27.6 | 32.5 |
| Maximum DC Resistant@20℃ | Ω/km | 0.195 | 0.154 | 0.126 | 0.1 | 0.0762 | 0.0607 | 0.0475 | 0.0369 | 0.0286 |
| Continuous Current Rating@45℃1 Core | A | 293 | 339 | 389 | 444 | 522 | 601 | 690 | 780 | 890 |
| Continuous Current Rating@45℃2 Core | A | 249 | 288 | 331 | 444 | 444 | 511 | 587 | 663 | 757 |
| Continuous Current Rating@45℃3&4 Core | A | 205 | 237 | 272 | 311 | 365 | 421 | 483 | 546 | 623 |
| Short Circuit Current 1s | A | 13590 | 17170 | 21460 | 26470 | 34340 | 42930 | 57230 | 71540 | 90140 |
| Operating Voltage | KV | 0.6/1 | 0.6/1 | 0.6/1 | 0.6/1 | 0.6/1 | 0.6/1 | 0.6/1 | 0.6/1 | 0.6/1 |
Note: For more than 4-cores, the current ratings may be calculated from the following formula (IN=I1/ ³√ N ), I1= Current rating for 1-core, N = Number of cores.
Ambient Temperature Correction Factors
| Ambient Temperature Correction Factors | 35 | 40 | 45 | 50 | 55 | 60 | 65 | 70 | 75 | 80 |
| Rating Factor | 1.1 | 1.05 | 1.0 | 0.94 | 0.88 | 0.82 | 0.74 | 0.67 | 0.58 | 0.47 |
P1/P8 RFOU/TFOU Mud Resistant Cable Specification
| Construction No. of cores×Cross section |
Nominal Insulation Thickness |
Nominal Inner Sheath Thickness |
Nominal Outer Sheath Thickness |
Nominal Overall Diameter |
Nominal Weight |
| (mm²) | mm | mm | mm | mm | kg/km |
| 1×1.5 | 1.0 | 1.1 | 1.1 | 8.9 | 135 |
| 1×2.5 | 1.0 | 1.1 | 1.1 | 9.3 | 150 |
| 1×4 | 1.0 | 1.1 | 1.1 | 9.9 | 180 |
| 1×6 | 1.0 | 1.1 | 1.1 | 10.4 | 205 |
| 1×10 | 1.0 | 1.1 | 1.2 | 12.2 | 295 |
| 1×16 | 1.0 | 1.1 | 1.2 | 13.5 | 385 |
| 1×25 | 1.2 | 1.1 | 1.2 | 15.4 | 525 |
| 1×35 | 1.2 | 1.1 | 1.3 | 16.9 | 685 |
| 1×50 | 1.4 | 1.1 | 1.4 | 18.7 | 870 |
| 1×70 | 1.4 | 1.1 | 1.4 | 20.4 | 1105 |
| 1×95 | 1.6 | 1.1 | 1.5 | 22.8 | 1435 |
| 1×120 | 1.6 | 1.2 | 1.6 | 24.9 | 1745 |
| 1×150 | 1.8 | 1.2 | 1.6 | 26.8 | 2055 |
| 1×185 | 2.0 | 1.2 | 1.7 | 29.3 | 2560 |
| 1×240 | 2.2 | 1.2 | 1.8 | 32.5 | 3190 |
| 1×300 | 2.4 | 1.2 | 1.9 | 35.2 | 3935 |
| 1×400 | 2.4 | 1.4 | 2.1 | 40.5 | 5060 |
| 1×500 | 2.4 | 1.4 | 2.2 | 44.0 | 6180 |
| 1×630 | 2.4 | 1.4 | 2.3 | 48.0 | 7620 |
| 2×1.5 | 1.0 | 1.1 | 1.2 | 13.6 | 295 |
| 2×2.5 | 1.0 | 1.1 | 1.2 | 14.4 | 335 |
| 2×4 | 1.0 | 1.1 | 1.3 | 16.1 | 445 |
| 2×6 | 1.0 | 1.1 | 1.3 | 17.1 | 520 |
| 2×10 | 1.0 | 1.1 | 1.4 | 19.3 | 680 |
| 2×16 | 1.0 | 1.1 | 1.5 | 21.7 | 955 |
| 2×25 | 1.2 | 1.2 | 1.6 | 25.9 | 1335 |
| 2×35 | 1.2 | 1.2 | 1.7 | 27.9 | 1595 |
| 2×50 | 1.4 | 1.2 | 1.9 | 31.9 | 2250 |
| 2×70 | 1.4 | 1.2 | 2.1 | 35.8 | 2795 |
| 2×95 | 1.6 | 1.2 | 2.3 | 41.2 | 3780 |
| 2×120 | 1.6 | 1.4 | 2.4 | 44.8 | 4560 |
| 2×150 | 1.8 | 1.4 | 2.6 | 49.2 | 5500 |
| 2×185 | 2.0 | 1.4 | 2.7 | 53.8 | 6675 |
| 2×240 | 2.2 | 1.6 | 3.0 | 61.0 | 8605 |
| 2×300 | 2.4 | 1.6 | 3.2 | 67.0 | 10510 |
| 3×1.5 | 1.0 | 1.1 | 1.2 | 14.2 | 320 |
| 3×2.5 | 1.0 | 1.1 | 1.3 | 15.6 | 415 |
| 3×4 | 1.0 | 1.1 | 1.3 | 16.8 | 500 |
| 3×6 | 1.0 | 1.1 | 1.4 | 18.1 | 605 |
| 3×10 | 1.0 | 1.1 | 1.4 | 20.3 | 795 |
| 3×16 | 1.0 | 1.1 | 1.5 | 22.8 | 1125 |
| 3×25 | 1.2 | 1.2 | 1.6 | 27.5 | 1620 |
| 3×35 | 1.2 | 1.2 | 1.7 | 29.6 | 1955 |
| 3×50 | 1.4 | 1.2 | 1.9 | 33.9 | 2730 |
| 3×70 | 1.4 | 1.4 | 2.0 | 38.4 | 3655 |
| 3×95 | 1.6 | 1.4 | 2.2 | 43.8 | 4885 |
| 3×120 | 1.6 | 1.4 | 2.3 | 47.6 | 6000 |
| 3×150 | 1.8 | 1.6 | 2.5 | 52.4 | 7300 |
| 3×185 | 2.0 | 1.6 | 2.7 | 58.6 | 8960 |
| 3×240 | 2.2 | 1.8 | 2.9 | 66.1 | 11610 |
| 3×300 | 2.2 | 1.8 | 3.4 | 71.9 | 13490 |
| 4×1.5 | 1.0 | 1.1 | 1.3 | 15.7 | 350 |
| 4×2.5 | 1.0 | 1.1 | 1.3 | 16.6 | 425 |
| 4×4 | 1.0 | 1.1 | 1.4 | 18.1 | 590 |
| 4×6 | 1.0 | 1.1 | 1.4 | 19.5 | 725 |
| 4×10 | 1.0 | 1.1 | 1.5 | 22.1 | 955 |
| 4×16 | 1.0 | 1.2 | 1.6 | 25.2 | 1375 |
| 4×25 | 1.2 | 1.2 | 1.7 | 30.0 | 1965 |
| 4×35 | 1.2 | 1.2 | 1.8 | 32.4 | 2410 |
| 4×50 | 1.4 | 1.4 | 2.0 | 37.3 | 3365 |
| 4×70 | 1.4 | 1.4 | 2.2 | 42.1 | 4580 |
| 4×95 | 1.6 | 1.4 | 2.4 | 48.2 | 6020 |
| 4×120 | 1.6 | 1.6 | 2.5 | 52.7 | 7440 |
| 4×150 | 1.8 | 1.6 | 2.9 | 58.3 | 8800 |
| 4×185 | 2.0 | 1.6 | 3.1 | 64.0 | 10760 |
| 4×240 | 2.2 | 1.8 | 3.4 | 72.4 | 13890 |
| 4×300 | 2.4 | 1.8 | 3.7 | 79.8 | 17405 |
| 5×1.5 | 1.0 | 1.1 | 1.3 | 16.7 | 420 |
| 6×1.5 | 1.0 | 1.1 | 1.3 | 17.8 | 495 |
| 7×1.5 | 1.0 | 1.1 | 1.3 | 17.8 | 540 |
| 8×1.5 | 1.0 | 1.1 | 1.5 | 20.3 | 645 |
| 9×1.5 | 1.0 | 1.1 | 1.5 | 21.5 | 675 |
| 10×1.5 | 1.0 | 1.1 | 1.5 | 21.8 | 705 |
| 12×1.5 | 1.0 | 1.1 | 1.5 | 22.5 | 805 |
| 14×1.5 | 1.0 | 1.1 | 1.6 | 23.6 | 860 |
| 16×1.5 | 1.0 | 1.1 | 1.7 | 24.9 | 940 |
| 19×1.5 | 1.0 | 1.1 | 1.7 | 26.0 | 1100 |
| 20×1.5 | 1.0 | 1.1 | 1.7 | 27.2 | 1130 |
| 23×1.5 | 1.0 | 1.1 | 1.8 | 29.3 | 1285 |
| 24×1.5 | 1.0 | 1.1 | 1.8 | 30.0 | 1305 |
| 27×1.5 | 1.0 | 1.1 | 1.9 | 30.8 | 1460 |
| 30×1.5 | 1.0 | 1.1 | 1.9 | 31.8 | 1520 |
| 33×1.5 | 1.0 | 1.2 | 2.0 | 33.5 | 1670 |
| 37×1.5 | 1.0 | 1.2 | 2.0 | 34.6 | 1840 |
| 44×1.5 | 1.0 | 1.2 | 2.2 | 39.2 | 2210 |
| 5×2.5 | 1.0 | 1.1 | 1.4 | 18.0 | 555 |
| 6×2.5 | 1.0 | 1.1 | 1.4 | 19.2 | 590 |
| 7×2.5 | 1.0 | 1.1 | 1.4 | 19.2 | 655 |
| 8×2.5 | 1.0 | 1.1 | 1.5 | 21.8 | 775 |
| 9×2.5 | 1.0 | 1.1 | 1.6 | 23.3 | 785 |
| 10×2.5 | 1.0 | 1.1 | 1.6 | 23.6 | 865 |
| 12×2.5 | 1.0 | 1.1 | 1.6 | 24.5 | 955 |
| 14×2.5 | 1.0 | 1.1 | 1.7 | 25.5 | 1070 |
| 16×2.5 | 1.0 | 1.1 | 1.7 | 26.7 | 1155 |
| 19×2.5 | 1.0 | 1.1 | 1.8 | 28.2 | 1360 |
| 20×2.5 | 1.0 | 1.1 | 1.8 | 29.5 | 1410 |
| 23×2.5 | 1.0 | 1.1 | 1.9 | 31.8 | 1610 |
| 24×2.5 | 1.0 | 1.2 | 2.0 | 33.2 | 1690 |
| 27×2.5 | 1.0 | 1.2 | 2.0 | 33.9 | 1815 |
| 30×2.5 | 1.0 | 1.2 | 2.0 | 34.9 | 1960 |
| 33×2.5 | 1.0 | 1.2 | 2.1 | 36.7 | 2190 |
| 37×2.5 | 1.0 | 1.2 | 2.1 | 38.0 | 2370 |
| 44×2.5 | 1.0 | 1.2 | 2.3 | 42.6 | 2795 |
Please note that the above specifications are “general specifications” that pertain to the majority of our production. These specifications should only be used for general, informational purposes. All dimensions and specifications are nominal and are subject to normal manufacturing tolerances. All specifications are subject to change without prior notice. All pictures shown are for illustration purposes only. Actual product may vary. Classification certification like CCS, DNV, BV, LR, NK, KR, RS shall be provided upon request.
Reviews
There are no reviews yet.