RONDOFLEX NGRDGOEU Festoon Bus Cable
RONDOFLEX NGRDGOEU Festoon Bus Cable Application
RONDOFLEX NGRDGOEU Rubber Sheathed Festoon Bus Cable, for use on festoon systems machine tools, material handling equipment, associated with high mechanical stresses and frequent bending during operation, also suitable for light duty reeling applications.
RONDOFLEX NGRDGOEU Festoon Bus Cable Construction
|Conductor||bare Electrolytic copper, finely stranded, class 5|
|Insulation)||High-grade special compound based on high-quality EPR (at least GI3); improved mechanical and electrical characteristics|
|Shield for individually shielded cores and twisted and shielded pairs||Braid screen made of tinned copper wires, transfer impedance optimized at 30 MHz.Surface covered:at least 60%: for individually shielded cores, at least 80%: for twisted and shielded pairs|
|Core identification||Best identification as a result of light-colored insulation with numbers printed in black for power and control cables, earth conductor green/ yellow|
|Core arrangement||Laid-up in a maximum of 3 layers|
|Inner sheath||Basic material EPR, Rubber compound GM 1b Colour: black|
|Outer sheath||High-grade special compound (at least 5GM3); based on PCP; Color: black|
RONDOFLEX NGRDGOEU Festoon Bus Cable Code Designation
|G||outer sheath constructed of rubber|
|Ö||oil-resistant sheath material|
|U||outer sheath with low flammability|
|according to DIN VDE 0472|
|-J||with a green/yellow identification of the earth/ground conductor|
|-O||without a green/yellow identification of the earth/ground conductor|
RONDOFLEX NGRDGOEU Festoon Bus Cable Technical Data
|Rated voltage||Uo/U = 0.6/1kV|
|Max permissible operating voltage in AC systems||Uo/U = 0.7/1.2kV|
|Max permissible operating voltage in DC systems||Uo/U = 0.9/1.8kV|
|AC test voltage||2.5 kV over 5 min|
|Fully flexible operation
|-35℃ to +60℃
-50℃ to +80℃
|Max permissible operating
temperature of the conductor
|Short-circuit temperature of the conductor||250℃|
|Tensile load||Up to 15N/mm2|
NGRDGOEU Rubber Sheathed Festoon Control Cable Specification
|Number of cores andnominal cross-section||Conductordiameter||Overall diameter ofcable Min. value||Overall diameter ofcable Max. value||Approx. net weightfor 1000 m||Maximum permissibletensile force|
|NGRDGOEU–O bus cables|
1)Packing in drums or roll, or by customer request.
2)Festoon application it is not recommended to have a cross-section beyond 3×50²!
3)regular delivery time is about 25 working days.for some type cable, delivery time can be expedited within 10~15 working days.
The above specifications are “general specifications” that pertain to the majority of our production. These specifications should only be used for general, informational purposes.All dimensions and specifications are nominal and are subject to normal manufacturing tolerances. All specifications are subject to change without prior notice. All pictures shown are for illustration purposes only. Actual product may vary.