20ft T14 Linnig tank container
20ft T14 Linnig tank container Introduction
The 20ft T14 Lining tank container is designed to comply with the requirements of IMDG Code, aiming at transportation and stock chemicals on the road, rail, ship, trailer, etc. This Lining Tank is made of stainless steel or carbon steel with Rock wool or glass wool insulation.
The medium that this type of container could carry would be Sulfurous acid, sulfuric acid, nitric acid, formic acid, hydrofluoric acid, boric acid, arsenic acid, tartaric acid, phosphoric acid, chromic acid, hydrogen peroxide, tannic acid, lactic acid, benzene sulfonic acid, hydrochloric acid, ammonia, potassium hydroxide, calcium hydroxide, sodium hydroxide, ammonium chloride, aluminum chloride, calcium chloride, copper chloride, sodium carbonate, sodium sulfite, alum, copper sulfate, ferrous chloride, sodium chloride, magnesium chloride, potassium permanganate, sodium hypochlorite, potassium bromide, ammonium nitrate, silver nitrate, potassium nitrate,copper nitrate, acetone,amyl alcohol, aniline, ether, alcohol, glycol, petrol, olive oil, xylene, glycerine, ethyl acetate, acetaldehyde, toluene, kerosene, carbamide, phenol, butanol, methane, methanol, plasticizer, etc.
The lining materials used in this type of lining tank container are PE, PTFE, PFA, Rubber, CHEMLINE, etc.
Standard: IMDG, RID/ADR, ASME VII DIV2, CFR 48, USDOT (BYSP), TIR, UIC, CSC, TC, UKDFT, FR
Design Temperature:-40 degree Celsius to +60 degree Celsius
Certificate: CSC certificate like GL/LR/BV/ABS
All tanks are of the highest quality design and construction and conform strictly to the latest international approvals.
20ft T14 Linnig tank container Specification
|Tank Type||20’ ISO full-frame collar tank, Type UN T14 portable, PE lined. Top rails fitted.|
|Frame Dimensions||20’ x 8’ x 8’6”|
|Capacity||17,500 Litres +/- 2%|
|Tare (est.)||5100 kgs|
|Max Payload||30,900 kgs|
|Working Pressure||4 Bar|
|Test Pressure||6 Bar|
|Design Temp||-40°C to +60°C|
|Shell Thickness||8 mm|
|Ends Thickness(B.F)||8 mm|
|Lining Material||PE 16mm|
|Frame Material||GB/T 1591-94-Q345D|
|Corner castings||ISO 1161 – 8 off|
|Vessel Design Code||ASME VIII Div 1|
|Radiography||Shell ASME Spot
Dished ends ASME Full
|Inspection Agency||Lloyds Register or BV|
|Design Approvals||IMDG T14, CFR 49, ADR/RID, CSC, TIR, ISO, US DOT|
Please note that the above specifications are “general specifications” that pertain to the majority of our products. These specifications should only be used for general, informational purposes. The measurement/size of the goods delivered may be different from the data in the above table, please check with us when order placed.